Topog-E® Series 1620 gaskets can be made from a wide variety of profiled alloy containment strips combined with specified sealing composites. Following ASME B16.20 code, the strips are wound around a mandrel specific to the finished gaskets internal dimensions. The gasket’s inside diameter contains, at a minimum, three plies of preformed metal strip without the sealing composite and is spot-welded at least three times at a distance no greater than 3” apart around the inner circumference. The sealing material, also in strip form, is introduced and wound together with the profiled alloy to achieve the total width of the gasket. The external layers, up to three plies, are spot-welded circumferentially with a minimum of three welds.
Drop Down Guide for the Below Tables:
Get exactly the size gauge glass you need. No guessing. No mistakes. White Glove boxing and insurance is included in the price!
Use our proprietary one-step glass ordering system! ONLY at BoilerSupplies.com
Items to be returned must be approved by Power Plus International, and may be subjected to a restocking fee
Notice: Due to the uncontrollable metal costs, all prices and delivery times are subject to change on a daily basis.
PPI™ and Power Plus International™, and related marks and logos displayed on the Site, are our trademarks and may not be used in any way without our prior express written permission. Nothing contained on the Site shall be construed as granting, by implication, estoppel or otherwise, any license or right to use any of our marks displayed on the Site without our prior express written permission. All other trademarks not owned by us that appear on this Site are the property of their respective owners.
*NOTE: The products described herein are not manufactured by Patterson-Kelley nor is Power Plus
International in any way associated or affiliated with "PK", Patterson-Kelley, or Harsco Corporation.
Contact Us Directly:
|
Mailing Address:
|
Contact Us Directly:
|
© 2024 Boiler Supplies. All Rights Reserved. |
Mailing Address:
|